Programming universal control ISEL 32T-U32S: Codes + Manual

Configure Universal Control ISEL 32T-U32S

In this guide we show you how to program your ISEL 32T-U32S control easily and quickly. Get your codes and your configuration instruction manual.

Programming universal control ISEL 32T-U32S

Below we show you the configuration instructions for the ISEL 32T-U32S control .

  1. Press the option of the device you want to configure for 3 seconds. Example: DVD, TV, Audio, Etc. The LED indicator light will remain on showing that the 32T-U32S control is ready to receive the corresponding code.

  2. Next press the 4 digits of the code that corresponds to the device you need to configure. Find the code in the list available for download at the end of this article.

  3. If the code you entered is correct, the 32T-U32S control light will flash 3 timesshowing that the code has been configured successfully.

  4. And ready! your 32T-U32S control is ready to be used, test that all the buttons work or if not repeat the configuration and programming steps.

Program universal control ISEL 32T-U32S automatically

Below you can find the steps to configure the ISEL 32T-U32S control by automatic search.

  1. Press the option of the device to configure for 3 seconds. Example: TV, AUX, Audio, DVD, ETC. The control light will remain on showing that the 32T-U32S control is ready to set the corresponding code.

  2. Next enter the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list provided below.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS
  3. The bright led indicator will flash continuously, so it is recommended to direct the universal control 32T-U32S towards the device you want to program, until it turns off.

  4. when the device turns on, you must pause the automatic search by pressing the DEVICE button. Example: DVD, TV, Audio, ETC.

    Note: if you need to go back in the search, press the channel key down ▼ or up ▲ in case you want to go up.

  5. To save the code to your 32T-U32S control press the device key.

  6. And ready! Your 32T-U32S control will have been configured.

ISEL 32T-U32S control manual and codes

It may interest you:

Faqs

What to do if my ISEL 32T-U32S control is unprogrammed or does not work?

Remove the batteries and put them back in before repeating the setup process explained in this guide.