Configure universal control ISEL 34T-X34S: Codes + instruction manual

Configure universal control ISEL 34T-X34S

Through these instructions we show you how to program your ISEL 34T-X34S control easily and quickly. Download your codes and programming instructions manual.

How to configure the ISEL 34T-X34S control?

Below you can find the configuration steps for your ISEL 34T-X34S control by entering your code manually.

  1. press the key PROG during 3 seconds. The LED indicator light will stay on.

  2. Now press the 4 digits of the code of the device you want to configure. Locate the code in the list provided below.

  3. If the code you entered is correct, the indicator on the 34T-X34S control will turn off and on 3 times signaling that the code has been programmed successfully.

  4. And ready! your 34T-X34S is ready to use, check that the buttons work or if not, go through the programming and configuration steps again.

How to configure ISEL 34T-X34S control automatically?

Below you will find the programming indications for the ISEL 34T-X34S control automatically.

  1. Garment manually the equipment you want to control with your 34T-X34S control

  2. press the button PROG by 3 seconds. The indicator light will stay on.

  3. Now press code 1001 (pointing at the TV or device) to start the code scan.

  4. Once the equipment turns on, you must stop the automatic search by pressing the key PROG

     Note: if you need to go back in the search press the channel button down ▼ or up ▲ in case you need to go up.

  5. to finish, you must save the programmed code by pressing the key once more PROG.

  6. And ready! Your 34T-X34S remote will have been programmed.

Manual and codes of the universal control ISEL 34T-X34S

It may interest you:


What to do if my ISEL 34T-X34S control is unprogrammed or does not work?

Remove the batteries from the controller and reinsert them to repeat the setup process.