Configure universal control ISEL 35T-X35S: Codes + manual

Do you want to program your ISEL 35T-X35S control ? In this guide we show you how to configure your ISEL 35T-X35S control easily and quickly . Get your codes and your programming instruction manual.

How to program the universal control ISEL 35T-X35S?

Below you can see the programming steps for your ISEL 35T-X35S control by entering your code manually.

1. press the key PROG during 3 seconds. The LED indicator light will stay on.

2. Now enter the 4 digits of the code that corresponds to the device you need to configure. Locate the code in the list below.

   XS-series-codes Download

3. If the code is correct, the led light will turn on and off. 3 times showing that the code has been programmed correctly.

4. And ready! your 35T-X35S is ready, verify that all the options work or otherwise go through the configuration and programming steps again.

Program universal control ISEL 35T-X35S automatically

Below we show you the configuration steps for your ISEL 35T-X35S control automatically.

1. turn on manually the device you need to use with your 35T-X35S control

2. press the option PROG during 3 seconds. The indicator light will stay on.

3. Now enter code 1001 (pointing at the TV or device) to start the code search.

   

4. Once the device turns on, you must stop the automatic search by pressing the button PROG

   Note: if you want to go back in the code scan, press the channel key down ▼ or up ▲ in case you want to go up.

5. Finally, you must save the programmed code by pressing the key once more PROG.

6. And ready! The 35T-X35S control will have been configured.

Frequent questions: