Configure universal control ISEL 39T-X39S: Codes + instruction manual

Configure universal control ISEL 39T-X39S

In this guide we show you how to program and configure your ISEL 39T-X39S control easily and quickly. Download your list of codes and configuration instructions manual.

Configure ISEL 39T-X39S control

Below you will find the programming steps for your ISEL 39T-X39S control by entering your code manually.

  1. press the key PROG during 3 seconds. The control light will remain on.

  2. now press the 4 digits of the code corresponding to the device you want to configure. Download the code in the list that you can find below.

  3. If the code you entered is correct, the 39T-X39S control LED will blink 3 times indicating that the code has been configured successfully.

  4. And ready! your 39T-X39S remote is ready to use, check that all options work or else go through the setup steps again.

Configure ISEL 39T-X39S control without code

Follow the configuration instructions for your ISEL 39T-X39S control automatically.

  1. turn on manually the device you want to use with your 39T-X39S control

  2. press the option PROG during 3 seconds. The indicator light will stay on.

  3. then press code 1001 (pointing at the TV or device) to start automatic scanning of the code.

  4. when the device turns on, you must pause the automatic search by pressing the key PROG

     Important: if you need to go back in the search, press the channel button down ▼ or up ▲ in case you want to go up.

  5. to finish, you must save the programmed code by pressing the key again PROG.

  6. And ready! The 39T-X39S control will be programmed.

ISEL 39T-X39S control manual and codes

It may interest you:


What should I do if my control is unprogrammed?

You can repeat the steps mentioned in this guide again to enter your device code again.