Programming universal control ISEL 48T-S48S: Codes + Manual

Configure universal control ISEL 48T-S48S

Discover how to program and configure your ISEL 48T-S48S control easily and quickly. Know your codes and your programming instruction manual.

How to program the universal control ISEL 48T-S48S?

Below we show you the instructions to configure your ISEL 48T-S48S control .

  1. Press the device option to configure for 3 seconds. Example: TV, AUX, Audio, DVD, ETC. The indicator light will remain on indicating that the 48T-S48S control is ready to receive the corresponding code.

  2. Now enter the 4 digits of the code corresponding to the device you want to configure. Find the code in the list that you will find below.

    codes-series-S Download

  3. If the entered code is correct, the 48T-S48S control indicator will turn on and off 3 times showing that the code has been programmed successfully.

  4. And ready! the 48T-S48S control is ready, try that all the buttons work or if not, repeat the configuration process again.

How to program the universal control ISEL 48T-S48S by automatic search?

Follow the steps to set up your ISEL 48T-S48S remote automatically and track the device code.

  1. Press the corresponding device button for 3 seconds. Example: DVD, TV, Audio, Etc. The control light will remain on signaling that the 48T-S48S control is ready to receive the corresponding code.

  2. Now place the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list that you can find below.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS

  3. The bright led will flash continuously, so we recommend pointing the 48T-S48S universal remote at the equipment you want to control, until it turns off.

  4. Once the equipment turns on, you must pause the automatic search by pressing the DEVICE key. Example: TV, DVD Audio, ETC.

    Note: if you need to go back in the code scan, press the channel button down ▼ or up ▲ in case you want to go up.

  5. To save the code to your 48T-S48S control use device key.

  6. And ready! Your 48T-S48S control will have been configured.

ISEL 48T-S48S Control Codes and Manual

SERIES-S-CODE-AND-MANUAL Download

It may interest you:

ISEL Universal Controls

Faqs

What to do if my control is unprogrammed or I want to change the device?

To set up your controller again, first remove the batteries and then reinsert them to repeat the programming process detailed in this guide.