Programming universal control ISEL 48T-U48: list of codes + manual

Configure universal control ISEL 48T-U48

Learn how to program and configure your ISEL 48T-U48 control easily and quickly. Download your code list and your configuration instruction manual.

Programming universal control ISEL 48T-U48

Below you will find the programming instructions for the ISEL 48T-U48 control by entering your code manually.

  1. Long press option of the device you need to program.

  2. Then press the 4 digits of the code that corresponds to the device. Find the code in the list that you can find here below.

  3. And ready! your 48T-U48 is ready to use, verify that all the keys work or if not repeat the programming and configuration steps.

Program universal control ISEL 48T-U48 automatically and without code

Below you will see the instructions to configure the ISEL 48T-U48 control automatically.

  1. turn on manually the equipment you want to use with your 48T-U48 control.

  2. hold down the key of the device to program «Example: TV». while entering the code 0000.

  3. Keep pointing the 48T-U48 controller at your device and repeatedly press the power key «POWER or CH▲» until your computer turns off.

     Note: if you need to go back in the search press the channel button down ▼ or up ▲ in case you want to go up.

  4. Finally, when the equipment is turned off, you must save the configuration by pressing the «okay«. the 48T-U48 control led will flash 3 times showing that the code has been configured successfully.

  5. And ready! Your 48T-U48 remote will have been programmed.

Manual universal control ISEL 48T-U48

It may interest you:

Frequent questions:

Is the 48T-U48 control suitable for audio equipment?

Yes, in its manual you can find the codes to configure each device.