Program universal control ISEL 48T-X48S: list of codes + instruction manual

Do you want to configure your ISEL 48T-X48S control? In this guide we show you how to configure and program your ISEL 48T-X48S control easily and quickly. Download your codes and programming instructions manual.

Configure ISEL 48T-X48S control

Below you will find the programming steps for the ISEL 48T-X48S control by entering your code manually.

1. press the option PROG by 3 seconds. The indicator light will stay on.

2. then press the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list that you can find below.

   XS-series-codes Download

3. If the inserted code is correct, the led of the 48T-X48S control will turn off and on 3 times signaling that the code has been configured successfully.

4. And ready! your 48T-X48S is ready to use, verify that all options work or else go through the setup and programming steps again.

How to program the universal control ISEL 48T-X48S by automatic search?

Below you will see the steps to configure the ISEL 48T-X48S control without entering codes.

1. turn o nmanually the device you need to use with your 48T-X48S control

2. press the key PROG by 3 seconds. The LED indicator light will stay on.

3. then press code 1001 (pointing at the TV or device) to start automatic scanning of the code.

   

4. when the device turns on, you must pause the automatic search by pressing the key PROG

   Important: if you want to go back in the code scan, press the channel key down ▼ or up ▲ in case you need to go up.

5. to finish, you must save the programmed code by pressing the key again PROG.

6. And ready! The 48T-X48S control will be configured.

Faqs