Configure universal control ISEL 58T-U58S: Codes + Manual

Configure universal control ISEL 58T-U58S

In this guide we show you how to configure your ISEL 58T-U58S control easily and quickly. Download its codes and its configuration instruction manual.

Programming universal control ISEL 58T-U58S

Below you can see the programming instructions for your ISEL 58T-U58S control .

  1. Press the button of the team you want to configure for 3 seconds. Example: DVD, TV, Audio, Etc. The luminous led indicator will stay on showing that the 58T-U58S control is ready to receive the corresponding code.

  2. Now press the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list available for download at the end of this guide.

  3. If the code is correct, the control led 58T-U58S it will turn off and on 3 times showing that the code has been configured successfully.

  4. And ready! the 58T-U58S control is ready to be used, try that all the options work or if not, repeat the programming and configuration process again.

How to configure ISEL 58T-U58S control automatically?

Below you will find the programming instructions for the ISEL 58T-U58S control automatically and by tracking the device code.

  1. Press the button of the equipment you need to configure for 3 seconds. Example: TV, DVD, AUDIO, ETC. The indicator light will stay on indicating that the 58T-U58S control is ready to receive the corresponding code.

  2. Now insert the 4 digit code of the device you wish to configure. Find the code in the list below.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS

  3. The bright led indicator will flash continuously, so point the 58T-U58S universal remote at the device you want to program, until it turns off.

  4. Once the device turns on, you must stop the automatic search by pressing the DEVICE button. Example: DVD, TV, Audio, ETC.

    Note: if you need to go back in the code scan press the channel key down ▼ or up ▲ in case you need to go up.

  5. To save the code to your 58T-U58S control use device key.

  6. And ready! Your 58T-U58S control will have been configured.

Manual and codes of the universal control ISEL 58T-U58S

SERIES-S-CODE-AND-MANUAL Download

It may interest you:

ISEL Universal Controls

Faqs

How do I insert my device code into my ISEL 58T-U58S control?

Simply press and hold the button corresponding to the device you want to configure for 3 seconds, until the LED light stays on. Then enter the code as we explain in this guide and voila!