Configure universal control ISEL 58T-U58SL: Codes + Manual

Configure Universal Control ISEL 58T-U58SL

We teach you how to configure your ISEL 58T-U58SL control in the fastest and most convenient way for you. Get your codes + instruction manual and learn to program automatically.

How to program universal control ISEL 58T-U58SL by code?

Follow the steps below to program your 58T-U58SL control using the corresponding code.

  1. Locate the code corresponding to your device, in the list that you will find below.

  2. Press the key of the device you want to configure for 3 seconds“Example: TV, DVD, ETC” until the indicator light stays on.

  3. Enter the 4-digit code from the list that corresponds to the brand and device you want to configure.

  4. The control led light will flash 3 times indicating that it has been saved successfully.

  5. And ready! your 58T-U58SL control will be configured and ready to be used with your device.

How to program the universal control ISEL 58T-U58SL automatically?

  1. Turn on the device you want to configure manually without using the controller.

  2. in control 58T-U58SL long press for 3 seconds the key of the device you want to configure, until the indicator light stays on.

  3. Point the controller at the device what are you configuring and Enter the 4-digit code corresponding.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS
  4. The luminous led of the control will remain blinking until you find the code of the television or device. When the remote detects the code, the TV or device will turn off / on.

  5. When the device is turned on or off, it is important stop the code search by pressing the OK key on the 58T-U58SL control.

     Note: If you couldn’t stop the code scan in time after the equipment turns on or off, you can go back the search by pressing the channel down (CH-) button.

  6. And ready! Your control will now be ready to be used.

Instruction manual ISEL 58T-U58SL

It may interest you:

Faqs

I don’t have the code for my 58T-U58SL control. How do I configure it?

You can use the automatic configuration that we show you in this guide to track the code of your device.

My control was deprogrammed again, what can I do?

Simply remove the batteries from the 58T-U58SL controller and reinsert them before repeating the setup procedure shown in this guide.