Program universal control ISEL 59T-S59S: Codes + Manual

Configure universal control ISEL 59T-S59S

Do you need to program the ISEL 59T-S59S control ? In this guide we show you how to program your ISEL 59T-S59S control easily and quickly. Get your list of codes and your programming instruction manual.

How to configure the ISEL 59T-S59S control?

Below we show you the configuration steps for the ISEL 59T-S59S control .

  1. Press the device option you need to set for 3 seconds. Example: DVD, TV, Audio, Etc. The indicator light will stay on indicating that the 59T-S59S control is ready to receive the corresponding code.

  2. Now press the 4 digits of the code of the device you want to configure. Download the code in the list available below.

    list-of-codes-ISEL-series-S Download

  3. If the code you entered is correct, the led light it will turn off and on 3 times indicating that the code has been configured successfully.

  4. And ready! the 59T-S59S control is ready to use, check that the buttons work or if not repeat the programming and configuration process.

How to program the universal control ISEL 59T-S59S by automatic search?

Below you will see the instructions to configure your ISEL 59T-S59S control automatically.

  1. Press the corresponding device key for 3 seconds. Example: DVD, TV, Audio, Etc. The indicator light will stay on signaling that the 59T-S59S control is ready to receive the corresponding code.

  2. Next enter the 4 digits of the code indicated for the equipment you want to configure. Find the code in the list that you can find here.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS

  3. The led indicator light will flash continuously, so we recommend pointing the 59T-S59S universal remote at the equipment you want to program, until it turns off.

  4. Once the equipment turns on, you must pause the automatic search by pressing the DEVICE key. Example: DVD, TV, Audio, ETC.

    Note: if you want to go back in the code scan, press the channel key down ▼ or up ▲ in case you want to go up.

  5. To save the code to your 59T-S59S remote press the device key.

  6. And ready! Your 59T-S59S control will have been configured.

ISEL 59T-S59S Control Codes and Manual

SERIES-S-CODE-AND-MANUAL Download

It may interest you:

ISEL Universal Controls

Faqs

Does my ISEL 59T-S59S control work for DVD?

Yes, locate your DVD code in this guide and follow our setup instructions.