Programming universal control ISEL 59T-X590: Codes + manual

Configure universal control ISEL 59T-X590

In this guide we explain how to program and configure your ISEL 59T-X590 control easily and quickly. Download your list of codes and configuration instructions manual.

Configure ISEL 59T-X590 control

Below we show you the steps to configure your ISEL 59T-X590 control by entering your code manually.

  1. Hold down the button MUTE and enter the 4 digits of the code indicated for the equipment you want to configure. Download the code in the list below.

  2. release the key MUTE to finish programming and the 59T-X590 control light will flash 3 times showing that the code has been programmed successfully.

  3. And ready! your 59T-X590 remote will issue the code POWER to turn on your device.

Configure ISEL 59T-X590 control without code

Below you will find the configuration steps for the ISEL 59T-X590 control without entering codes.

  1. Garment manually the equipment you need to use with your 59T-X590 control

  2. hold down the key MUTE and put the code 0000.

  3. release the key MUTE and the control led will remain on.

  4. Point the 59T-X590 controller at your device and repeatedly press the power key «POWER» until your TV turns off.

  5. Finally, when the equipment is turned off, you must save the programmed code by pressing the «okay«. the led light will turn off and on 3 times signaling that the code has been configured successfully.

  6. And ready!

Manual universal control ISEL 59T-X590

It may interest you:


How do I know the code of the device that I want to use with my control?

You can download or view the code of the device you want to configure in the list that we show you in this guide.