Programming universal control ISEL 59T-X59S: Codes + manual

Do you want to configure the ISEL 59T-X59S control? In this guide we show you how to program and configure your ISEL 59T-X59S control easily and quickly. Know your codes and programming instructions manual.
Programming ISEL 59T-X59S Universal Remote
Follow the programming instructions for your ISEL 59T-X59S remote by entering your code manually.
press the option PROG by 3 seconds. The indicator light will stay on.
then press the 4 digits of the code that corresponds to the device you need to configure. Download the code in the list available for download below.
If the code is correct, the led light will flash 3 times indicating that the code has been saved successfully.
And ready! your 59T-X59S is ready to be used, verify that all the keys work or if not repeat the programming and configuration process.
How to program the universal control ISEL 59T-X59S by automatic search?
Below we show you the programming instructions for the ISEL 59T-X59S control automatically and by tracking the device code.
Garment manually the device you want to use with your 59T-X59S controller
press the option PROG during 3 seconds. The indicator light will remain on.
then place code 1001 (pointing at the TV or device) to start the code scan.
Once the device turns on, you must stop the automatic search by pressing the button PROG
Note: if you need to go back in the search, press the channel key down ▼ or up ▲ in case you want to go up.
to finish, you must save the programmed code by pressing the key once more PROG.
And ready! Your 59T-X59S control will be configured.
ISEL 59T-X59S Control Codes and Manual
It may interest you:
Frequent questions:
To set up your universal remote isel 59T-X59S with codes, Press the button PROG for 3 seconds until the light stays on, then enter the code. You can see the list of device codes at the top of this guide.