Configure universal control ISEL 61T-U61S: Codes + Manual

Through these instructions we teach you how to configure and program your ISEL 61T-U61S control easily and quickly. Know your codes and programming instructions manual.

How to configure the ISEL 61T-U61S control?

Below you will find the programming instructions for your ISEL 61T-U61S control .

1. Press the corresponding device option for 3 seconds. Example: DVD, TV, Audio, Etc. The control light will stay on showing that the 61T-U61S control is ready to receive the corresponding code.

2. Now put the 4 digits of the code corresponding to the device you want to configure. Locate the code in the list that you can find at the end of this guide.

3. If the code is correct, the control led 61T-U61S will turn on and off 3 times indicating that the code has been saved successfully.

4. And ready! the 61T-U61S control is ready to use, test that the buttons work or else go through the setup and programming steps again.

How to program the universal control ISEL 61T-U61S by automatic search?

Below you can see the programming steps for your ISEL 61T-U61S control without entering codes.

1. Press the corresponding device option for 3 seconds. Example: TV, DVD, AUDIO, ETC. The indicator led light will remain on signaling that the 61T-U61S control is ready to receive the corresponding code.

2. Next enter the 4 digits of the code that corresponds to the device you need to configure. Locate the code in the list that you can find below.

   1001	TV/COMBOS
   3001	DVD, BD
   4001	HT
   5001	VCR
   6001	STB/STREAM (SAT/CABLE), DIGITAL MEDIA
   7001	AUDIO, SOUND BARS, RECEIVERS

3. indicator light will flash continuously, so we recommend pointing the 61T-U61S universal remote at the equipment you want to control, until it turns off.

4. when the equipment turns on, you must pause the automatic search by pressing the DEVICE key. Example: TV, DVD Audio, ETC.

   Note: if you want to go back in the code scan, press the channel button down ▼ or up ▲ if you want to go up.

5. To save the code to your 61T-U61S control use device key.

6. And ready! Your 61T-U61S control will have been configured.