How to program universal remote control Philips SRP3004/10: Code list + Manual

Learn how to program and configure your Philips SRP3004/10 remote control easily and quickly. Get your codes and your configuration instruction manual.

¿How to configure the Philips SRP3004/10 remote control?

Follow the configuration steps for your Philips SRP3004/10 remote via code.

1. Manually turn on your TV and set it to channel 1.

2. Press and hold the button of “TV“, DVD or the corresponding device you want to set up for 5 seconds until the light stays on.

   

3. Find at the end of this guide the list of codes corresponding to each device.

4. Press the code of the device you need to program.

   ⚠ Important: if the led light goes out, the code you have entered is not correct and you will need to try again.

   

5. With the Philips remote pointing at the SRP2008B/86 television, press and hold the “Power” button until the equipment turns off.

   

   💬 This process can take between 5 seconds to 1 minute. On some TV brands, the procedure can take up to 15 minutes.

6. Finally, turn on the TV and check all the buttons on the remote and voila!