How to program Philips SRP4004/53 universal remote: Code list + Manual

Configure universal remote control Philips SRP4004/53

Learn how to configure and program your Philips SRP4004/53 remote control easily and quickly. Know your list of codes and programming instructions manual.

Configure Philips SRP4004/53 remote control

Below you will see the steps to configure the Philips SRP4004/53 remote control.

  1. Turn on your TV manually and tune to channel 1

  2. Press and hold the “TV“, DVD or device button you need to configure for 5 seconds until the LED light stays on.

    💬 When the light turns on, the control will be ready in configuration mode.

  3. Find the code for your brand and device in the list at the end of this guide.

  4. Enter the code of the device you want to configure.

    ⚠ If the LED indicator turns off, the entered code is not correct and you will need to try again.

  5. Point the Philips SRP2008B/86 remote at the TV and hold down the “Power” key until the TV turns off.

    💬This can take between 10 and 60 seconds. On some device brands, the process can take up to 15 minutes.

  6. To finish, turn on the TV and check all the buttons on the control and voila!

Philips SRP4004/53 control codes and manual

It may interest you:


The code in the list does not work, ¿what should I do?

If the first code entered doesn’t work, try the next code in the list.