Program and configure universal control RCA RCR412B with and without codes + instruction manual

We teach you how to configure and program your RCA RCR412B universal control for TV, DVD, Smart TV and all the devices available for each model. Find out the programming codes and instruction manuals.

How to program universal control RCA RCR412B without code list

Below you can find the programming steps for your RCA RCR412B control by automatic search.

1. Manually turn on the TV or device you want to control.

2. On your RCR412B control, hold down the corresponding device key, Example: DVD, TV, and at the same time press the ON/OFF button until the red light turns on.

3. Next, point your RCA universal control directly at the television and press the PLAY ▶ key.

4. Wait for the TV or device to turn off. (if nothing happens and the light stays on, after 3 or 4 seconds press the PLAY ▶ key again).

5. When the TV turns off, the next thing is to press the REVERSE (REW) option and wait a few seconds for the TV or device to turn on. If after waiting 3 or 4 seconds it does not turn on, press the REVERSE key again.

   ⚠This must be done until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. And ¡ready! Your RCR412B control will have been programmed.