How to program universal control RCA RCR412S with and without codes + manual

Learn how to configure and program the RCA RCR412S universal control for Smart TV, TV, DVD and other devices. Discover the programming codes and their instruction manuals.

Program universal control RCA RCR412S manually and without codes

Below you will find the configuration steps for your RCA RCR412S control automatically and by tracking the device code.

1. Manually turn on the TV or device you want to control.

2. On your RCR412S control, hold down the corresponding device key, eg: DVD, TV, and at the same time press the ON/OFF key until the red light turns on.

3. Next, point your RCA universal control at the television or device and press the PLAY ▶ option.

4. Wait until your TV or device turns off. (if nothing happens and the indicator light stays on, after 3 or 4 seconds press the PLAY ▶ key again).

5. When the TV turns off, the next thing is to press the REVERSE (REW) button and wait a few seconds for the TV to turn on. If after waiting 3 or 4 seconds it does not turn on, press the REVERSE option again.

   ⚠This step must be repeated until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. And ¡ready! The RCR412S control will be configured.