How to program universal control RCA RCR4258N with and without codes + instruction manual

We show you how to program and configure the RCA RCR4258N universal control for TV, DVD, Smart TV and all the devices available for each model. Find their lists of programming codes and instruction manuals.

How to program universal control RCA RCR4258N without code

Below you can see the configuration steps for your RCA RCR4258N control automatically and by tracking the device code.

1. Manually turn on the TV or device you want to program.

2. On your RCR4258N control, hold down the corresponding device option, eg: TV, and at the same time press the ON/OFF button until the red light comes on.

3. Next, point the RCA universal control directly at the television and press the PLAY ▶ key.

4. Wait for the TV or device to turn off. (if nothing happens and the red light stays on, after 3 or 4 seconds, press the PLAY ▶ option again).

5. When the TV or device turns off, the next step is to press the REVERSE (REW) key and wait a few seconds for the TV to turn on. If after waiting 3 or 4 seconds it doesn’t turn on, press the REVERSE button again.

   ⚠This step must be done until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. ¡And ready! Your RCR4258N control will be configured.