Program and configure universal control RCA RCR460 with and without codes + instruction manual

Learn how to program and configure the RCA RCR460 universal control for TV, DVD, Smart TV and all the devices available for each model. Find out the programming codes and instruction manuals.

Program universal control RCA RCR460 manually and without codes

Below you will find the instructions to configure the RCA RCR460 control automatically and by tracking the device code.

1. Manually turn on the TV or device you want to program.

2. On the RCR460 control, press and hold the appliance option, Example: TV, and at the same time press the ON/OFF key until the red light turns on.

3. Next, point your RCA universal remote directly at the TV or device and press the PLAY ▶ button.

4. Wait for the TV or device to turn off. (if nothing happens and the light stays on, after 3 or 4 seconds press the PLAY ▶ key again).

5. When the TV turns off, the next thing is to press the REVERSE (REW) button and wait a few seconds for the TV to turn on. If after waiting 3 or 4 seconds it does not turn on, press the REVERSE key again.

   ⚠This step must be repeated until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. ¡And ready! Your RCR460 control will have been programmed.