Program and configure universal control RCA RCU300 with and without codes + instruction manual

Configure Universal Remote RCA RCU300

Learn how to configure and program the RCA RCU300 universal control for DVD, Smart TV, TV and compatible devices. Get their setup codes and manuals.

How to program universal control RCA RCU300 without code list

Below you can see the programming instructions for your RCA RCU300 control automatically and by tracking the device code.

💬IMPORTANT: before starting with the instructions, locate the ENTER or OK button on your control RCA RCU300 and remember its position. You’ll need it in step 5, where you can’t take more than 4 seconds to press it.

  1. Manually turn on the TV or device you want to program on the RCU300 universal remote.

  2. On your control, press and hold the CODE SEARCH key until the indicator LED turns on.

  3. Press the button of the device you want to program once. Example: DVD, VCR, TV, SAT, ETC the indicator led should blink once and stay on.

    💬 The number of times you need to press the POWER button may vary depending on the type of TV or device you are setting up. You can try up to 250 Times or restart the instructions from the beginning.

  4. When the TV or device turns off, press the ENTER button, without letting a maximum of 4 seconds pass after the TV or device turns off. the indicator led will turn off and your control will be programmed.

  5. And ¡ready! You can now use your RCA RCU300 universal control.

RCA RCU300 Universal Remote Instruction Manual

More RCA controls: