How to program universal control RCA RCU400 with and without codes + instruction manual

Configure Universal Control RCA RCU400

We show you how to configure and program your RCA RCU400 universal control for Smart TV, TV, DVD and other devices. Discover its configuration codes and instruction manuals.

Program universal control RCA RCU400 manually and without codes

Below you will find the programming steps for the RCA RCU400 control by automatic search.

💬IMPORTANT: before starting this guide, find the option OK or ENTER in the control RCA RCU400 and remember its position. You will use it in step 5, where you should not take more than 4 seconds to press it.

  1. Manually turn on the TV or device you want to program to the RCU400 universal remote.

  2. On the remote, press and hold the CODE SEARCH option until the indicator light turns on.

  3. Press once the option of the device you need to program. Ex: DVD, VCR, TV, SAT, ETC the led indicator should flash once and stay on.

    💬 The number of times you must press the ON/OFF option may vary depending on the make and model of the equipment you are programming. You can try up to 250 times or repeat the process.

  4. As soon as the device or TV turns off, press the ENTER option, without letting a maximum of 4 seconds pass since the device turned off. The indicator light will turn off and your remote will be configured.

  5. And ready! You can now use your RCA RCU400 universal control.

RCA RCU400 Universal Remote Instruction Manual

More RCA controls: