Program and configure universal control RCA RCU410MS with and without codes + instruction manual

We show you how to configure and program your RCA RCU410MS universal control for TV, DVD, Smart TV and all the devices available for each model. Check out their programming code lists and their instruction manuals.

Program RCA RCU410MS universal remote automatically without codes

Below you can find the configuration steps for the RCA RCU410MS control by automatic search.

💬IMPORTANT: before starting, locate the ENTER or OK key on your control RCA RCU410MS and remember its position. You will need it at point 5, where you cannot take more than 4 seconds to press it.

1. Manually turn on the device or TV that you want to configure in the RCU410MS control.

2. On your remote, press and hold the CODE SEARCH button until the light comes on.

3. Press once the option of the device you want to configure. Ex: TV, DVD, VCR or SAT·CBL·DTC. the led indicator should blink once and stay on.

   💬 The number of times it will be necessary to press the power key varies depending on the type of equipment you are configuring. You can try up to 250 times or repeat the instructions from the beginning.

4. When the TV or device turns off, press the ENTER key, without a maximum of 4 seconds passing since the device turned off. the light will turn off and the control will be programmed.

5. And ready! You can now use the RCA RCU410MS universal control.