Program and configure universal control RCA RCU500 with and without codes + instruction manual

We teach you how to program your RCA RCU500 universal control for TV, DVD, Smart TV and all the devices available for each model. Discover their configuration codes and their instruction manuals.

Program universal control RCA RCU500 without code

Below you will find the configuration instructions for the RCA RCU500 control without entering codes.

⚠RECOMMENDATION: before starting, locate the ENTER or OK button on the control RCA RCU500 and memorize its position. You will use it at point 5, where you do not have to take more than 4 seconds to press it.

1. Manually turn on the TV or device you want to program in the RCU500 universal control.

2. On the remote, press and hold the CODE SEARCH button until the light comes on.

3. Press once the key of the device you need to program. Example: DVD, VCR, TV, SAT, ETC the led indicator should blink once and stay on.

   💬 The number of times it will be necessary to press the ON/OFF option varies depending on the type of equipment you are programming. You can try up to 250 times or repeat the process.

4. When the device or TV turns off, press the ENTER option, without delaying a maximum of 4 seconds since the device turned off. the led indicator will turn off and your control will be programmed.

5. And ready! you can now use the universal control RCA RCU500.