Program and configure universal control RCA RCU600M with and without codes + instruction manual

Configure Universal Control RCA RCU600M

Learn how to configure and program the RCA RCU600M universal control for TV, DVD, Smart TV and all the devices available for each model. Find out their configuration codes and their manuals.

How to program universal control RCA RCU600M without code

Below you can find the programming steps for your RCA RCU600M control by automatic search.

💬IMPORTANT: before starting with the instructions, find the ENTER or OK button on your control RCA RCU600M and memorize its position. You will use it at point 5, where you cannot take more than 4 seconds to press it.

  1. Manually turn on the device or TV you need to program on the RCU600M universal remote.

  2. On the remote, press and hold the CODE SEARCH button until the indicator light illuminates.

  3. Press the device key you need to program once. Ex: DVD, VCR, TV, SAT, ETC the led indicator should blink once and stay on.

    💬 The number of times it will be necessary to press the ON/OFF option varies depending on the model of the TV or device you are configuring. You can try up to 250 times or repeat the process.

  4. When the device or TV turns off, press the ENTER button, without letting a maximum of 4 seconds pass after the TV or device turns off. the indicator led will turn off and your control will be configured.

  5. ¡And ready! you can now use your RCA RCU600M control.

RCA RCU600M Universal Remote Instruction Manual

More RCA controls: