Programming universal control ISEL 32T-S32S: Codes + Manual

Configure universal control ISEL 32T-S32S

Do you need to configure the ISEL 32T-S32S control ? In this guide we show you how to program your ISEL 32T-S32S control easily and quickly. Download your list of codes and your programming instruction manual.

Programming universal control ISEL 32T-S32S

Below you can find the steps to configure the ISEL 32T-S32S control .

  1. Press the device option to configure for 3 seconds. Example: TV, DVD, AUDIO, ETC. The indicator led light will stay on signaling that the 32T-S32S control is ready to receive the corresponding code.

  2. Now press the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list below.

  3. If the entered code is correct, the 32T-S32S control led will turn on and off 3 times indicating that the code has been configured successfully.

  4. And ready! your 32T-S32S control is ready to use, verify that all options work or otherwise repeat the configuration steps.

Program universal control ISEL 32T-S32S automatically

Below you can find the programming instructions for your ISEL 32T-S32S control automatically.

  1. Press the corresponding device key for 3 seconds. Example: TV, AUX, Audio, DVD, ETC. The control light will remain on indicating that the 32T-S32S control is ready to receive the corresponding code.

  2. Next press the 4 digits of the code indicated for the equipment you want to configure. Locate the code in the list below.

    1001TV/COMBOS
    3001DVD, BD
    4001HT
    5001VCR
    6001STB/STREAM (SAT/CABLE), DIGITAL MEDIA
    7001AUDIO, SOUND BARS, RECEIVERS
  3. The led indicator light will flash continuously, so we recommend pointing the 32T-S32S universal control directly at the equipment you want to program, until it turns off.

  4. Once the equipment turns on, you must pause the automatic search by pressing the DEVICE key. Example: TV, DVD Audio, ETC.

    Important: if you want to go back in the search, press the channel button down ▼ or up ▲ in case you want to go up.

  5. To save the code to your 32T-S32S remote use device button.

  6. And ready! Your 32T-S32S control will have been configured.

ISEL 32T-S32S Control Codes and Manual

It may interest you:

Frequent questions:

How to reprogram my control for another device?

Before beginning to reprogram the ISEL 32T-S32S control to another device, remove the batteries and re-insert them to reset it and repeat the setup process again.