Programming universal control ISEL 59T-U59: list of codes + instruction manual

Configure universal control ISEL 59T-U59

In this guide we show you how to configure and program your ISEL 59T-U59 control easily and quickly. Know your codes and configuration instructions manual.

How to configure the ISEL 59T-U59 control?

Below we show you the configuration steps for the ISEL 59T-U59 control by entering your code manually.

  1. press the option of the device you need to program by 3 seconds. The LED indicator light will remain on.

  2. now insert the 4 digits of the code that corresponds to the device you need to configure. Find the code in the list available for download below.

  3. If the code entered is correct, the 59T-U59 control indicator will turn on and off. 3 times signaling that the code has been saved successfully.

  4. And ready! your 59T-U59 control is ready to use, check that it works by pressing the button POWER to turn on the appliance.

How to configure ISEL 59T-U59 control automatically without code?

Below you will find the programming instructions for your ISEL 59T-U59 control by automatic search.

  1. Garment manually the equipment you need to configure.

  2. On your remote, press the button Of the device by 3 seconds. The bright led on.

  3. then press the code 0000 (pointing at the TV or device).

  4. Keep pointing the 59T-U59 controller at your device and repeatedly press the power button «POWER either channel up ▲» until your computer turns off.

     Important: if you need to go back in the code scan press the channel button down ▼ or up ▲ in case you need to go up.

  5. Finally, when the equipment is turned off, you must save the configuration by pressing the «ENTER«. the 59T-U59 control light will turn off and on 3 times showing that the code has been configured successfully.

  6. And ready! Your 59T-U59 remote will have been programmed.

ISEL 59T-U59 control configuration manual

It may interest you:


How many times can I set my ISEL 59T-U59 universal remote?

You can reset it as many times as you like, simply remove the batteries and re-insert them before following the setup steps in this guide.