Programming universal control ISEL 59T-X59: list of codes + manual

In this guide we explain how to configure and program your ISEL 59T-X59 control easily and quickly. Download your code list and your configuration instruction manual.

Programming universal control ISEL 59T-X59

Below you can see the steps to configure your ISEL 59T-X59 control by entering your code manually.

1. hold the button PROG and place the 4 digits of the code corresponding to the device you want to configure. Download the code in the list that you can find below.

   

   code-X59 Download

2. release the key PROG to end programming and the indicator light will flash 3 times showing that the code has been programmed successfully.

3. And ready! the 59T-X59 control will output the code POWER to turn on the device.

How to configure ISEL 59T-X59 control automatically?

Below you will find the instructions to configure your ISEL 59T-X59 control automatically.

1. Garment manually the device you need to control with your 59T-X59 remote

2. hold the button PROG and then press the code 0000.

   

3. release the key PROG and the indicator led will remain on.

4. Point the 59T-X59 controller at your computer and repeatedly press the power key «POWER» until your TV turns off.

5. Finally, when the equipment is turned off, you must save the configuration by pressing the «okay«. the 59T-X59 control indicator will turn off and on 3 times signaling that the code has been configured successfully.

6. And ready!

Frequent questions: