How to program Philips SRP3011/10 universal remote: Code list + Manual

Learn how to configure and program your Philips SRP3011/10 remote control easily and quickly. Download your codes and configuration instructions manual.

Program Philips SRP3011/10 universal remote with code.

Below we show you the instructions to configure the Philips SRP3011/10 remote by entering the code of the device to be programmed.

1. Turn on your TV without using the remote.

2. Aim at your tv and hold “1” and “6” at the same time for 5 seconds until the blue LED indicator lights up.

   

3. Find your brand’s 5-digit code in the list of codes at the end of this guide.

4. Enter the first 5-digit code corresponding to the brand of TV or device using the number buttons.v

   ⚠ If the code is valid, it will be saved automatically and the light will remain off. Otherwise, the light will blink once, then stay on to re-enter the code.

5. And ready! check that all the keys work correctly or otherwise repeat the configuration process with another code or automatically.

Program Philips SRP3011/10 universal remote automatically.

Below we show you the instructions to configure the Philips SRP3011/10 remote tracking the code automatically.

1. Turn on your TV without using the remote.

2. Aim at your tv and hold “1” and “6” at the same time for 5 seconds until the blue LED indicator lights up.

   

3. Point the universal remote at the TV or device and repeatedly press the “Power” button to track the device code.

   

4. When the device turns off, immediately press the “ok” button to save the code. The red LED indicator will turn off.

   

5. And ready! Your control is now ready to be used.

FAQs: