Configure Philips SRP3014/10 universal remote: Code list + Manual

Configure Philips SRP3014/10 universal remote

In this guide we explain how to configure your Philips SRP3014/10 remote control easily and quickly. Get your codes and your configuration instruction manual.

¿How to configure the Philips SRP3014/10 remote control?

Follow the instructions to set up the Philips SRP3014/10 remote.

  1. Turn on your TV or device.

  2. Press and hold the device button (Ej; TV) for 5 seconds until the blue LED turns on.

  3. Find the 5-digit code for your TV or device in the list provided at the end of this guide.

  4. Enter the 5-digit code using the number buttons.

  5. If the code is correct, the light will turn off and the remote is ready to use. Otherwise, the light will blink once, then stay on for the code to be pressed again.

  6. And ready!

How to configure the Philips SRP3014/10 remote control?

Follow the instructions to set up the Philips SRP3014/10 remote.

  1. Turn on your TV or device.

  2. Press and hold the device button (ON; TV) for 5 seconds until the blue LED turns on.

  3. Point the remote directly at the TV or device and repeatedly press the “Power” button to track the device code.

  4. When the device turns off, immediately press the “ok” key to save the code. The red LED indicator will turn off.

  5. And ready!

Philips SRP3014/10 remote control code list and manual

It may interest you:

FAQs:

The code doesn’t work. What can I do?

If the code listed for your device brand doesn’t work, try auto-configuration for setup.