Configure Philips SRU9400/10 universal remote: Codes + Manual

In this guide we show you how to program and configure your Philips SRU9400/10 remote control easily and quickly. Download your code list and your configuration instruction manual.

Configure Philips SRU9400/10 remote control with code

Below you will find the configuration instructions for your Philips SRU9400/10 remote by entering the corresponding code.

1. Press the “Mode” key to select the type of device you want to control. The LED indicator of the device will turn on.

2. Press and hold “SETUP” for 3 seconds to bring up the setup menu.

3. Next, press the “Code” option.

4. Find the code corresponding to your device brand in the manual provided at the end of this guide.

5. Enter the 4-digit setup code.

6. If the code is correct, the “code” key will blink 2 times.

   If the code is incorrect, the Code button will flash once.
   Check that you have entered the code correctly or try again with the next code corresponding to the brand of your device.

7. And ready!

Configure Philips SRU9400/10 remote control automatically

Next you will learn how to configure your Philips SRU9400/10 remote control automatically.

💬Before starting with the configuration steps, remember to manually turn on the device you want to configure.

1. Press the “Mode” key to select the device you want to find the setup code for. The Device Indicator Light will turn on.

2. Press and hold “SETUP” for 3 seconds to bring up the setup menu.

3. Next, press the “Search” option. The Search and Exit Setup keys will appear.

4. Then point the remote directly at the TV or device and press and hold the “OK” key

   The remote will start to scan the device code.

5. When the device turns off, immediately release the “OK” key

   ⚠Make sure you don’t press other keys.
   The IR code set for the selected device has been activated
   and the last page accessed on the device is displayed on the screen
   tactile.

6. And ready! Check that your controller is working properly or repeat the setup steps.

FAQs: