Program and configure universal control RCA RCR312W with and without codes + instruction manual

Learn how to program and configure your RCA RCR312W universal control for Smart TV, TV, DVD and other devices. Find the programming codes and their manuals.

Program RCA RCR312W universal remote automatically without codes

Below you will find the instructions to configure your RCA RCR312W control automatically and by tracking the device code.

1. Manually turn on the TV or device to be programmed.

2. On your RCR312W control, hold down the key of the corresponding device, eg: TV, and at the same time press the ON/OFF button until the red light turns on.

3. Next, point your RCA universal remote directly at the TV or device and press the PLAY ▶ key.

4. Wait until the TV or device turns off. (if nothing happens and the red light stays on, after 3-4 seconds press the PLAY ▶ button again).

5. Once the TV or device turns off, the next step is to press the REVERSE (REW) key and wait a few seconds to see if the TV turns on. If after 3 or 4 seconds it does not turn on, press the REVERSE key again.

   ⚠This step must be done until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. And ¡ready! Your RCR312W control will be configured.