How to program and configure universal control RCA RCR6473 with and without codes + manual

We teach you how to configure and program the RCA RCR6473 universal control for DVD, Smart TV, TV and compatible devices. Discover their configuration codes and their instruction manuals.

How to program universal control RCA RCR6473 without code

Below you will see the configuration instructions for the RCA RCR6473 control without entering codes.

1. Manually turn on the TV or device you want to program.

2. On your RCR6473 control, hold down the corresponding device key, eg DVD, TV, and at the same time press the ON/OFF key until the red light turns on.

3. Next, point your RCA remote at the television or device and press the PLAY ▶ option.

4. Wait for the TV or device to turn off. (if nothing happens and the indicator light stays on, after 3 or 4 seconds press the PLAY ▶ option again).

5. When the TV or device turns off, the next thing is to press the REVERSE (REW) option and wait a few seconds for the TV to turn on. If after 3 or 4 seconds it doesn’t turn on, press the REVERSE option again.

   ⚠This must be done until the TV or device turns on.

6. When the TV turns on, press the STOP button to stop searching and save the settings.

7. And ready! The RCR6473 control will be configured.