Program Philips SRP4004/87 or SRP4004/86 universal remote control: Code list + Manual

Through these instructions we show you how to program your Philips SRP4004/87 or SRP4004/86 remote control easily and quickly. Download your codes and configuration instructions manual.

Configure Philips SRP4004/87 or SRP4004/86 remote by code

Below you will find the steps to enter the code corresponding to your device in your Philips SRP4004/87 remote control.

1. Turn on your TV, DVD or Device to be configured and tune to channel 1

2. Press and hold the “TV“, DVD or device key you want to configure for 5 seconds until the led stays on.

   

   💬 When the led turns on, the control will be in configuration mode.

3. Search and find the device code in the list that you will find at the end of these instructions.

4. Press the code corresponding to the device you want to configure.

   ⚠ If the LED light turns off, the code marked is not the one indicated. In that case, try again.

   

5. Point the Philips SRP2008B/86 remote at the TV and hold down the “Power” key until the TV turns off.

   

   💬This step can take between 5 and 60 seconds. In some cases, this can take up to 15 minutes.

6. To finish, turn on the TV and try all the functions of your control and voila!

FAQs: